EN 61000

The EN 61000 test standard is the base EMC standard for the European Union. Furthermore, many other EMC standards are generated for EN 61000. EN 61000 testing involves reviewing and applying the nine sections of the standard. These include but are not limited to functional safety, measurement uncertainty, emission limits, immunity limits, measurement techniques, testing techniques, installation guidelines, and generic emission and immunity requirements in various environments.

Keystone Compliance specializes in EN-61000 testing. As a regulatory compliance lab, Keystone has seven EMC test chambers. So, scheduling an EN 61000 test program does not typically require a long lead time. On average, we schedule EN-61000 EMC tests within two weeks of the request. Having a dedicated report writer allows us to publish our EMC test reports equally fast. We generally distribute them one week after testing has been completed.

What sets Keystone Compliance apart from other EMC test labs is our troubleshooting expertise. Having completed thousands of EN 61000 test programs, our engineering team quickly identifies the sources of problems when they arise.

Keystone is not an EN 61000 test lab that states pass or fail. Instead, we provide value engineering throughout the testing. Our engineers are focused on helping every client meet the requirements of the EN 61000 test.

Listed below are some of the specific EN 61000 EMC test standards. Click on a link to learn more about a particular standard. Also, if you do not see the standard that you need, contact us. We have thousands of standards in our scope of accreditation but only so many available web pages.

EN/TR 61000-1-1 Electromagnetic compatibility (EMC) – Part 1: General – Section 1: Application and interpretation of fundamental definitions and terms
EN/TR 61000-2-1 Electromagnetic compatibility (EMC) – Part 2: Environment – Section 1: Description of the environment – Electromagnetic environment for low-frequency conducted disturbances and signaling in public power supply systems
EN/TR 61000-2-3 Electromagnetic compatibility (EMC) – Part 2: Environment – Section 3: Description of the environment – Radiated and non-network-frequency-related conducted phenomena
EN 61000-3-2 Electromagnetic compatibility (EMC) – Part 3-2 – Limits – Limits for harmonic current emissions (equipment input current 16 A per phase)
EN 61000-3-4 Electromagnetic compatibility (EMC) – Part 3-4: Limits – Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
EN/TS 61000-3-5 Electromagnetic compatibility (EMC) – Part 3: Limits – Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
EN 61000-4-2 Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test
EN 61000-4-3 Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test
EN 61000-4-5 Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test
EN 61000-4-6 Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-7 Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
EN 61000-4-8 Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test
EN 61000-4-9 Electromagnetic compatibility (EMC) – Part 4-9: Testing and measurement techniques – Pulse magnetic field immunity test
EN 61000-4-10 Electromagnetic compatibility (EMC) – Part 4-10: Testing and measurement techniques-Damped oscillatory magnetic field immunity test
EN 61000-4-11 Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions, and voltage variations immunity tests
EN 61000-4-12 Electromagnetic compatibility (EMC) – Part 4-12: Testing and measurement techniques – Ring wave immunity test
EN 61000-4-13 Electromagnetic compatibility (EMC) – Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signaling at a.c. power port, low frequency, immunity tests
EN 61000-4-16 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61000-4-17 Electromagnetic compatibility (EMC) – Part 4-17: Testing and measurement techniques – Ripple on d.c. input power port immunity test
EN 61000-4-18 Electromagnetic compatibility (EMC) – Part 4-18: Testing and measurement techniques – Damped Oscillatory Wave immunity test
EN 61000-4-29 Electromagnetic compatibility (EMC) – Part 4-29: Testing and measurement techniques – Voltage dips, short interruptions, and voltage variations on d.c. input power port immunity tests
EN 61000-6 Electromagnetic compatibility (EMC) – Testing of Industrial Environments
EN 61000-6-1 Electromagnetic compatibility (EMC) – Part 6-1: Immunity Testing of Residential, commercial, and Light-Industrial Environments
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Immunity Testing of Industrial Environments
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Emission Testing of Residential, commercial, and Light-Industrial Environments
EN 61000-6-4 Electromagnetic compatibility (EMC) – Part 6-4: Emission Testing of Industrial Environments

Request a Quote

EN 61000

EMC Testing