
MIL-STD-1344 Testing
MIL-STD-1344 is revised periodically. The most recent version is MIL-STD-1344 A.
MIL-STD 1344 establishes uniform test methods for testing electrical connectors.
As of October 2004, the MIL-STD 1344 test procedures are canceled and replaced with EIA 364 standards. For future information about MIL-STD 1344, please refer to EIA 364 and the following pages:
EIA-364E Electrical Connectors/Sockets
EIA-364-17 Temperature Life Testing of Electrical Connectors and Sockets
EIA 364-26 Salt Spray Testing of Electrical Connectors, Contacts and Sockets
EIA 364-27 Mechanical Shock, Specified Pulse, Testing of Electrical Connectors and Sockets
EIA 364-28 Vibration Testing of Electrical Connectors and Sockets
EIA 364-31 Humidity Testing of Electrical Connectors and Sockets
EIA-364-32 Thermal Shock, Temperature Cycling, Testing of Electrical Connectors and Sockets
Below are the test methods and descriptions for MIL STD 1344:
MIL-STD 1344 Test Method 1001.1 Salt Spray
MIL-STD 1344 Test Method 1002.2 Humidity
MIL-STD 1344 Test Method 1003.1 Temperature Cycling
MIL-STD 1344 Test Method 1004.1 Altitude Immersion
MIL-STD 1344 Test Method 1005.1 Temperature Life
MIL-STD 1344 Test Method 1006.1 Hydrostatic Pressure
MIL-STD 1344 Test Method 1007.1 Ozone Exposure
MIL-STD 1344 Test Method 1008 Air Leakage
MIL-STD 1344 Test Method 1009 Firewall
MIL-STD 1344 Test Method 1011 Altitude – Low Temperature
MIL-STD 1344 Test Method 1012 Flammability
MIL-STD 1344 Test Method 1015 Simulated Life
MIL-STD 1344 Test Method 1016 Fluid Immersion
MIL-STD 1344 Test Method 2001.1 Contact Axial Concentricity
MIL-STD 1344 Test Method 2002.1 Maintenance Aging
MIL-STD 1344 Test Method 2003.1 Crimp Tensile Strength
MIL-STD 1344 Test Method 2004.1 Shock (Specified Pulse)
MIL-STD 1344 Test Method 2005.1 Vibration
MIL-STD 1344 Test Method 2006.1 Probe Damage (Contacts)
MIL-STD 1344 Test Method 2007.1 Contact Retention
MIL-STD 1344 Test Method 2008.1 Crush
MIL-STD 1344 Test Method 2009.1 Cable Pull-Out
MIL-STD 1344 Test Method 2010.1 Insert Retention
MIL-STD 1344 Test Method 2011.1 Acceleration
MIL-STD 1344 Test Method 2012.1 Contact Insertion and Removal Force
MIL-STD 1344 Test Method 2013.1 Mating and Unmating Forces
MIL-STD 1344 Test Method 2014 Contact Engagement and Separation Force
MIL-STD 1344 Test Method 2015 Impact
MIL-STD 1344 Test Method 2016 Durability
MIL-STD 1344 Test Method 2017 Cable Seal Flexing
MIL-STD 1344 Test Method 2018 Gage Location and Retention
MIL-STD 1344 Test Method 3001.1 Dielectric Withstanding Voltage
MIL-STD 1344 Test Method 3002.1 Low Signal Level Contact Resistance
MIL-STD 1344 Test Method 3003.1 Insulation Resistance
MIL-STD 1344 Test Method 3004.1 Contact Resistance
MIL-STD 1344 Test Method 3005 Standing Wave Radio (SWR)
MIL-STD 1344 Test Method 3006 Magnetic Permeability
MIL-STD 1344 Test Method 3007 Shell to Shell Conductivity
Keystone Compliance assists manufacturers with MIL-STD-1344 compliance. This page lists every method and section of the standard for informational purposes. There may be methods and sections that fall outside of our scope. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your MIL-STD-1344 needs.