EN 61000-4-4 EMC Immunity Testing of Electrical Fast Transient/Bursts
EN 61000-4-4 test standard relates to the immunity of electrical and electronic equipment to repetitive electrical fast transients. EN 61000-4-4 test labs provide immunity requirements and test procedures related to electrical fast transients/bursts. EN 61000-4-4 testing additionally defines ranges of test levels and establishes test procedures.
Ready to get started? We are! Request a quote to see why so many manufacturers trust Keystone Compliance with their IEC/EN 61000-4-4 EMC testing. Keystone provides the peace of mind that all of your certification testing needs are met all under one roof.
Summary of EN 61000-4-4 Immunity Testing of Electrical Fast Transients/Bursts
EN 61000-4-4 testing establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment. The equipment has to be first subjected to electrical fast transients/bursts on supply, signal, control, and earth ports. The EN 61000-4-4 test method assesses the immunity of an equipment or system against a defined phenomenon.
EN 61000-4-4 defines:
- test voltage waveform
- range of test levels
- test equipment
- verification procedures of test equipment
- test set-up
- test procedure
EN 61000 4 4 testing gives specifications for laboratory and post-installation tests. The repetitive fast transient test is a test with bursts consisting of several fast transients, coupled into a power supply, control, signal, and earth ports of electrical and electronic equipment.
The test is intended to demonstrate the immunity of electrical and electronic equipment. However, only when subjected to types of transient disturbances such as those originating from switching transients. This may include interruption of inductive loads, relay contact bounce, etc.
Expert EN 61000-4-4 Immunity EMC Testing
Keystone Compliance has expansive fast transient and burst immunity capabilities. These capabilities have allowed us to become one of the preeminent EN 61000-4-4 test labs in the country. Our unique approach focuses on compliance. Our team strives to assist every manufacturer with meeting the requirements of EN 61000-4-4 testing.
From shielding to cable lengths, our team identifies where the obstacles are occurring. Next, we determine what engineering modifications need to occur for the device to meet the EN 61000-4-4 test requirements.
Keystone Compliance assists manufacturers with IEC 61000-4-4 and EN 61000-4-4 compliance testing. Please contact us for more information on how Keystone Compliance can assist you with your EN 61000-4-4 test lab needs.