IEC 61000-6-4 EMC/EMI Emission Compliance Testing of Industrial Environments
IEC 61000-6-4 lab testing applies to electrical units intended to be used in industrial environments. As a leader in electromagnetic compatibility, EMC, regulatory lab compliance testing, Keystone Compliance assists electronic equipment manufacturers with EMC testing. Meeting the IEC, EN, and other EMC testing requirements can be challenging. Not only do we understand the challenges, but we help guide companies through the process.
Regarded as a leader in unintentional radiator testing, Keystone Compliance assists companies in EMC testing daily. Keystone’s EMC testing engineers streamline the process and assist companies to achieve the compliance they require. Keystone takes pride in providing the peace of mind that all of your unintentional radiator testing needs will be met. Our proven process helps avoid product launch delays.
Request a quote to see why we are one of the fastest-growing electromagnetic compatibility testing labs in the country. Ready to get started? We are. Contact us to see why so many companies work with us to achieve their EMC testing needs.
Summary of IEC 61000-6-4 Emission Industrial Compliance Testing
As mentioned above, IEC 61000-6-4 laboratory compliance testing applies to electrical and electronic apparatus intended for use in industrial environments. Industrial locations are characterized by both indoor and outdoor equipment. They are also classified by the existence of one or more of the following:
- Industrial, scientific, and medical (ISM) apparatus;
- Heavy inductive or capacitive loads that are frequently switched;
- High currents and associated magnetic fields.
The generic EMC emission standard applies if no relevant dedicated product or product-family EMC emission standard exists.
The emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified.
This IEC electromagnetic compatibility standard applies to an apparatus intended to be connected to a power network supplied from a high or medium voltage transformer. The transformer must be dedicated to the supply of an installation feeding manufacturer or similar plant. It must also be intended to operate in or in proximity to industrial locations.
This IEC test procedure also applies to apparatus, which is battery operated and intended to be used in industrial locations.
Scope of IEC 61000-6-4 Compliance Testing
The emission requirements are selected to ensure that disturbances generated by apparatus operating normally in industrial locations do not exceed a level that could prevent other apparatus from operating as intended.
Terms used multiple times within this standard include:
Port – A port is a particular interface of the specified apparatus with an external electromagnetic environment.
Enclosure Port – This is a physical boundary of the apparatus that electromagnetic fields may radiate through or impinge on.
Cable Port – Port at which a conductor or a cable is connected to the apparatus
Telecommunications/Network Port – This is a point of connection for voice, data and signaling transfers intended to interconnect widely dispersed systems via such means as direct connection to multi-user telecommunications networks.
Power Port – A power port is a port at which a conductor or cable carrying the primary electrical power needed for the operation of an apparatus or associated apparatus is connected to the apparatus
Lastly, it is important to note that not all disturbance phenomena have been included for testing purposes in this EMC standard. Only those considered as relevant for the equipment covered by this standard are included.
IEC 61000-6-4 Testing Conditions
The equipment under test is tested in the operating mode producing the largest emission in the frequency band being investigated. This is based on limited pre-tests and is consistent with normal applications. The configuration of the test sample is to be carried to achieve maximum emission consistent with typical applications and installation practice.
If the apparatus is part of a system or can be connected to an auxiliary apparatus, the apparatus is tested while connected to the minimum representative configuration. This is similar to that described in CISPR 11 and CISPR 22.
The emission compliance requirements for apparatus covered by this standard are given on a port-by-port basis. Measurements are conducted in a well-defined and reproducible manner. Lastly, it is noted that the measurements can be performed in any order.
Keystone Compliance Offers Expert IEC 61000-6 Lab Testing Services
Keystone Compliance can accommodate fixed, mobile and portable devices of all sizes. In addition to IEC 61000 testing, Keystone has a full scope of expertise including environmental and package testing such as cold chain, accelerated aging, and temperature. Keystone has a full lab of test equipment which permits us to provide short lead times on scheduling.
If you are ready to start your emission standard compliance testing, please request a quote. Have a question about EMC emission testing for industrial environments? Contact us or call (724) 657-9940 and we will determine the best course of action.
For more information on IEC 61000-6 testing, follow the links below:
- IEC 61000-6 EMC Testing of Industrial Environments
- IEC 61000-6-1 EMC Immunity Testing of Residential, Commercial, and Light-Industrial Environments
- IEC 61000-6-2 EMC Immunity Testing of Industrial Environments
- IEC 61000-6-3 EMC Emission Testing of Equipment in Residential Environments
- IEC 61000-6-4 EMC Emission Testing of Industrial Environments