Select Page

KN 61000-6-3 EMC Emission Testing of Residential, Commercial, and Light-Industrial Environments

KN 61000 method 6-3 applies to electrical equipment intended for commercial, residential, and light-industrial environments. As a leader in EMC regulatory compliance testing, Keystone Compliance assists electronic equipment manufacturers with EMC testing. Meeting the IEC, EN, and other EMC testing requirements can be challenging. Not only do we understand the challenges, but we help guide companies through the process.

Keystone takes pride in providing the peace of mind that all of your unintentional radiator testing needs will be met. We have a reputation for helping customers achieve their EMC product certifications. We tailor each test plan to individual customer needs minimizing unnecessary costs and over-testing. Additionally, we are in constant communication throughout the entire test process.

Request a quote to receive expert electromagnetic compatibility testing services tailored to your specific needs. Contact us to receive more information on KN 61000-6-3 emission testing.

Summary of KN 61000-6-3 Emission Testing

The KN 61000-6-3 test standard is for EMC emission requirements that apply to electrical and electronic apparatus intended for use in residential, commercial, and light-industrial environments. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified.

KN 61000 6 3 is harmonized with IEC 61000 6 3 and is the EMC emission standard that applies if no relevant dedicated product or product family EMC emission standard exists.

The KN 61000-6-3 lab test applies to apparatus intended to be directly connected to a low-voltage public mains network or connected to a dedicated DC source, which is intended to interface between the apparatus and the low-voltage public mains network.

This electromagnetic compatibility standard applies also to apparatus which are battery operated or powered by a non-public, but non-industrial, low-voltage power distribution system if this apparatus is intended to be used in the locations described below.

The environments encompassed by this standard are residential, commercial, and light-industrial locations, both indoor and outdoor. The following list, although not comprehensive, indicates locations that are included:

  • residential properties, for example, houses, apartments;
  • retail outlets, for example, shops, supermarkets: business premises, for example, offices, banks;
  • areas of public entertainment, for example, cinemas, public bars, dance halls; outdoor locations, for example, petrol stations, car parks. amusement and sports centers;
  • light-industrial locations, for example, workshops, laboratories, service centers.

Locations that are characterized by being supplied directly at low voltage from the public mains network are considered to be residential, commercial, or light-industrial. The object of this standard is to define the emission test requirements for apparatus defined in the scope in relation to continuous and transient, conducted, and radiated disturbances.

The emission requirements have been selected to ensure that disturbances generated by apparatus operating normally in residential, commercial, and light-industrial locations do not exceed a level that could prevent other apparatus from operating as intended. Fault conditions of apparatus are not taken into account.

Not all disturbance phenomena have been included for testing purposes in this standard but only those considered as relevant for the equipment covered by this standard. These requirements represent essential electromagnetic compatibility emission requirements.

Expert KN 61000-6-3 Standard Lab Testing Services

Keystone Compliance is an expert in KN 61000-6-3 testing.

In addition to KN 61000-6-3 testing, Keystone has a full scope of expertise including environmental and package testing such as cold chain, accelerated aging, and vibration. Keystone Compliance can accommodate fixed, mobile and portable devices of all sizes. Our team strives to give our customers more time and energy on product development instead of testing. 

When failures occur, our engineers work to not just identify the source of the problem but to also suggest corrective measures to help the unit meet the requirements of the standard.

Contact us to receive a quote on your KN 61000-6-3 test program or IEC 61000-6-3 test program.

For more information on KN 61000-6 testing, follow the links below: