ASTM D7386 Single Parcel Delivery Systems
ASTM D7386 evaluates hazards that the unit encounters throughout the delivery. As an ISTA and ISO 17025 certified lab, we realize the importance of ASTM D7386 package testing. Meeting the ASTM D7386 single parcel requirements can be difficult. We understand the challenges and guide companies through the process.
Our proven process helps avoid product launch delays. Keystone Compliance creates an accurate test plan to eliminate expensive over-testing. We have a reputation of helping customers achieve their package certifications. When packages do not meet the requirements, we assist with finding solutions. We are in constant communication throughout the test process.
Summary of ASTM Single Parcel Delivery Information
The ASTM D7386 test is intended for shipping units weighing less than or equal to 150 lbs. The test will be conducted in the order of hazards that are anticipated throughout distribution. The test methods used to simulate the shipping environment are representative of those conditions in actual distribution. The test should be performed on a container throughout the ordered test sequence.
Scope of ASTM D7386 Package for Single Parcel Testing
For performance testing of packages, the unit must remain unopened until testing is complete. However, it can be beneficial to open the container at various points to evaluate the condition of its contents.
The test specimen should be prepared in accordance with the standards outlined by ASTM D7386. The test specimens are representative samples of complete shipping units. The sample should include the actual contents used in the field.
If the ASTM test specimen is shipped to the test laboratory rather than assembled on site, take care to ensure there is no damage prior to beginning testing.
The test objectives will determine how many replications are necessary. However, replicating the test is recommended to ensure more accurate results. The test specimen will be examined and labeled prior to testing.
Significance of ASTM D7386 Single Parcel Delivery Systems Testing
The organization conducting the test will establish acceptance criteria prior to testing. When choosing criteria, they should consider the required condition of the package upon arrival at the shipping destination.
Criteria can range from pass-fail judgement to quantitative scoring or analysis. The form and content of acceptance criteria can vary widely depending on the circumstances. A common example of acceptance criteria is:
Criterion 1- product is damage-free
Criterion 2- package is intact
Criterion 3- both criteria 1 and 2
The ASTM test protocol is outlined fully by ASTM D7386 standard. The procedure follows this sequence:
- Describe and define the package test samples in terms of size, weight, and form of construction.
- Determine acceptance criteria- develop the acceptance criteria with the end of distribution in mind
- Write test plan- use the sequence of the table below to write a test plan
- Select samples for test
- Condition samples
- Perform tests (refer to the ASTM D7386 standard)
- Evaluate results- determine if the container has met the acceptance criteria
- Document test results- report each step of the test
- Monitor shipments- if possible, monitor shipments to ensure the accuracy of laboratory test results compared to the actual distribution system
Hazard Elements and Test Schedules
Handling- manual and automated
Vibration and Vibration under load
Rotational Edge Drops
Expert ASTM Single Parcel Package Testing
Keystone has a full lab of test equipment which permits us to provide short lead times on scheduling. Our team strives to give our customers more time and energy on product development instead of testing. We can accommodate flexible and rigid packages of all sizes, including large pallets.
Contact us to learn first hand why so many companies partner with Keystone to achieve their ASTM D7386 single parcel certification needs.