IEC 61058-1-2 Testing
Switches for appliances – Part 1-2: Requirements for electronic switches
IEC 61058-1-2 Scope:
IEC 61058 1 2 and EN 61058 1 2 testing applies to electronic switches for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A.
These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch.
Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door.
NOTE 1: Electronic switches may be combined with mechanical switches giving full disconnection or micro-disconnection.
NOTE 2: Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live.
NOTE 3: For switches used in tropical climates, additional requirements may be necessary.
NOTE 4: Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches.
NOTE 5: Throughout this standard, the word “appliance” means “appliance or equipment”.
NOTE 6: This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested, this part is applicable together with the relevant Part 2 of IEC 61058.
IEC 61058-1-2 may, however, be applied for other types of switches that are not mentioned in a relevant Part 2 of IEC 61058, provided that the electrical safety is not disregarded.
IEC 61058-1-2 testing applies to switches intended to be incorporated in, on or with an appliance.
EN 61058-1-2 also applies to switches incorporating electronic devices.
This standard also applies to switches for appliances such as:
- Switches intended to be connected to a flexible cable (cord switches) for which, however, particular requirements are given in IEC 61058-2-1; NOTE In this document, the word “cable” means “cable or cord”.
- Switches integrated in an appliance (integrated switches);
- Switches intended to be mounted separately from the appliance (independently mounted switches) other than those within the Scope: of IEC 60669-1, for which, however, particular requirements are given in IEC 61058-2-4;
- Change-over selectors for which, however, particular requirements are given in IEC 61058-2-5.
IEC 61058-1-2 tests do not contain requirements for isolating switches. This standard does not apply to devices that control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730.
Keystone Compliance assists manufacturers with IEC 61058-1-2 and EN 61058-1-2 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 61058-1-2 test lab needs.
IEC 61058-1-1 Requirements for mechanical switches
IEC 61058-1-2 Requirements for electronic switches
IEC 61058-2-1 Cord switches
IEC 61058-2-4 Independently mounted switches
IEC 61058-2-5 Change-over selectors