NZS CISPR 11 RF Compliance and Disturbance Testing
New Zealand CISPR 11 laboratory testing applies to domestic and similar appliances designed to generate and/or use local radio frequency energy. As a leader in electromagnetic compatibility, EMC, regulatory compliance testing, Keystone Compliance assists electronic equipment manufacturers with CISPR EMC testing. Meeting the IEC, EN, and other CISPR testing requirements can be challenging. Not only do we understand the challenges, but we help guide companies through the process.
Our proven process helps avoid product launch delays. Regarded as a leader in electromagnetic compatibility, EMC, testing, Keystone Compliance assists companies in EMC testing on a daily basis. Our expert test engineers work with clients to quickly develop appropriate and concise test plans. Lastly, our lab features seven test chambers including a reverberation chamber.
Summary of NZS CISPR 11 Test Lab Device Information
This worldwide CISPR 11 standard applies to industrial, scientific, and medical electrical equipment operating within the frequencies of 0 Hz to 400 Hz.
Requirements for industrial, scientific, and medical (ISM) RF lighting equipment and UV irradiators operating within defined frequency bands are also integrated in this CISPR 11 standard. Lastly, equipment covered by other CISPR product family emission tests are not included in this RF device test.
Certain frequencies are designated by the International Telecommunication Union (ITU) for use for ISM RF applications.
The document following the equipment specification must contain details of any precautions to be observed. This equipment is not intended to be used in residential environments. In this environment, the equipment may not provide adequate protection to radio reception.
Scope of NZS CISPR 11 Industrial, Medical, and Scientific Electrical Equipment Testing
Equipment in this EMC regulatory compliance standard is split into group 1 and group 2.
Group 1 contains all equipment in this standard that is not classified within group 2. Group 1 will either meet both the average limit specified or the quasi-peak limit.
Group 2 equipment contains all ISM RF equipment in which RF energy ranging from 9 Hz to 400 GHz is intentionally generated and used. These frequencies are also used for the treatment of material, inspection/analysis purposes, or the transfer of electromagnetic energy.
Equipment is also classified into two of the following classes. Class A and Class B equipment.
Class A NZS equipment is suitable for use in all locations other than residential locations. Arc welding equipment that contains striking or stabilizing devices is classified as class A equipment.
Class B NZS equipment is used in residential environments and in establishments directly connected to a low voltage power supply network.
New Zealand CISPR 11 Compliance Test Disturbance Conditions
Load conditions of the equipment under test are specified below. Equipment not covered by this subclause is operated to maximize the disturbance generated while still conforming with normal operating procedures. This is as provided in the operating manual of the equipment.
The load used when industrial equipment is tested may be either the load used in service or an equivalent device. When testing with the load used in service, the electrodes and cables are disposed of in the manner of their normal use. Measurements are made at both maximum output power and at half-maximum output power. Equipment that normally operates at zero or very low output power is also tested in these conditions.
Scientific equipment is tested under normal operating conditions. Laboratory and measuring equipment is operated as intended. Any RF output ports are terminated in a matching non-radiating load.
Expert NZS CISPR 11 Unintentional Radiator Testing
Our team strives to give our customers more time and energy on product development instead of testing. Keystone has a full lab of test equipment which permits us to provide short lead times on scheduling. Keystone Compliance can accommodate fixed, mobile and portable devices of all sizes.
If you are ready to start your unintentional radiator EMC testing, please request a quote. Have a question about New Zealand CISPR 11 device testing or electromagnetic compliance? Contact us or call (724) 657-9940 and we will determine the best course of action.