IEC 60745-2-1 Testing
Hand-held motor-operated electric tools – Safety – Part 2-1: drills and impact drills
IEC 60745-2-1 Abstract:
IEC 60745 2 1 and EN 60745 2 1 testing deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for drills and impact drills. The rated voltage is not more than 250 V for single-phase A.C. or D.C., and 440 V for three-phase A.C. tools.
Keystone Compliance assists manufacturers with IEC 60745-2-1 and EN 60745-2-1 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 60745-2-1 test lab needs.
Related Standards:
IEC 60745-1 Hand-held motor-operated electric tools – Safety
IEC 60745-2-2 Screwdrivers and impact wrenches
IEC 60745-2-3 Grinders, polishers, and disk-type sanders
IEC 60745-2-4 Sanders and polishers other than disk type
IEC 60745-2-5 Circular saws
IEC 60745-2-6 Hammers
IEC 60745-2-7 Spray guns for non-flammable liquids
IEC 60745-2-8 Shears and nibblers
IEC 60745-2-9 Tappers
IEC 60745-2-11 Reciprocating saws (jig and sabre saws)
IEC 60745-2-12 Concrete vibrators
IEC 60745-2-13 Chain saws
IEC 60745-2-14 Planers
IEC 60745-2-15 Hedge trimmers
IEC 60745-2-16 Tackers
IEC 60745-2-17 Routers and trimmers
IEC 60745-2-18 Strapping tools
IEC 60745-2-19 Jointers
IEC 60745-2-20 Band saws
IEC 60745-2-21 Drain cleaners
IEC 60745-2-22 Cut-off machines
IEC 60745-2-23 Die grinders and small rotary tools