IEC 61347-2-13 Testing
Lamp controlgear – Part 2-13: D.C. or A.C. supplied electronic controlgear for LED modules
IEC 61347-2-13 Scope:
IEC 61347 2 13 and EN 61347 2 13 testing specifies particular safety requirements for electronic controlgear for use on D.C. or A.C. supplies up to 1000 V (A.C. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard.
The annexes of IEC 61347-1 which are applicable according to this Part 2-13 and using the word “lamp” are understood to also comprise LED modules. Performance requirements are covered by IEC 62384. Plug-in controlgear, being part of the luminaire, are covered as for built-in controlgear by the additional requirements of the luminaire standard.
Keystone Compliance assists manufacturers with IEC 61347-2-13 and EN 61347-2-13 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 61347-2-13 test lab needs.
IEC 61347-1 General requirements
IEC 61347-2-1 Starting devices (other than glow starters)
IEC 61347-2-2 D.C. or A.C. supplied electronic step-down convertors for filament lamps
IEC 61347-2-3 A.C. and/or D.C. supplied electronic control gear for fluorescent lamps
IEC 61347-2-7 Battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-8 Ballasts for fluorescent lamps
IEC 61347-2-9 Electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-10 Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-11 Miscellaneous electronic circuits used with luminaires
IEC 61347-2-12 D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)