IEC 62841-2-5 Testing
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: hand-held circular saws
IEC 62841-2-5 Abstract:
IEC 62841 2 5 and EN 62841 2 5 testing applies to hand-held circular saws. IEC 62841-2-5 does not apply to saws designed for use with abrasive wheels. Saws designed for use with abrasive wheels as cut-off machines are covered by IEC 62841-2-22. The rated voltage is not more than 250 V for single-phase A.C. or D.C. tools, and 480 V for three-phase A.C. tools. The rated input is not more than 3 700 W.
IEC 62841-2-5 compliance testing deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the Scope: of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered.
Keystone Compliance assists manufacturers with IEC 62841-2-5 and EN 62841-2-5 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 62841-2-5 test lab needs.
IEC 62841-1 General requirements
IEC 62841-2-2 Hand-held screwdrivers and impact wrenches
IEC 62841-2-4 Hand-held sanders and polishers other than disc type
IEC 62841-2-8 Hand-held shears and nibblers
IEC 62841-2-9 Hand-held tappers and threaders
IEC 62841-2-11 Hand-held reciprocating saws
IEC 62841-2-14 Hand-held planers
IEC 62841-3-1 Transportable table saws
IEC 62841-3-4 Transportable bench grinders
IEC 62841-3-6 Transportable diamond drills with liquid system
IEC 62841-3-9 Transportable mitre saws
IEC 62841-3-10 Transportable cut-off machines