Select Page

IEC 62321-1 Testing

Part 1: Introduction and overview

IEC 62321-1 Scope:

IEC 62321 1 and EN 62321 1 testing refers to the sample as the object to be processed and measured. The nature of the sample and the manner in which it is acquired is defined by the entity carrying out the tests and not by this standard.

It is noted that the selection of the sample may affect the interpretation of the test results. While EN 62321-1 provides guidance on the disassembly procedure employed for obtaining a sample, it does not determine or specify:

  • The level of the disassembly procedure required for obtaining a sample;
  • The definition of a “unit” or “homogenous material” as the sample;
  • Conformity assessment procedures.

Keystone Compliance assists manufacturers with IEC 62321-1 and EN 62321-1 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 62321-1 test lab needs.

Related Standards:

IEC 62321 Electro technical products – Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)

IEC 62321-2 Disassembly, disjunction and mechanical sample preparation

IEC 62321-3-1 Screening – Lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry

IEC 62321-3-2 Screening – Total bromine in polymers and electronics by Combustion – Ion Chromatography

IEC 62321-4 Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

IEC 62321-5 Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS

IEC 62321-6 Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography -mass spectrometry (GC-MS)

IEC 62321-7-1 Hexavalent chromium – Presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method