Select Page

IEC 60745-2-23 Testing

Hand-held motor-operated electric tools – Safety – Part 2-23: die grinders and small rotary tools

IEC 60745-2-23 Abstract:

IEC 60745 2 23 and EN 60745 2 23 testing applies to die grinders and small rotary tools for mounted accessories not exceeding 55 mm in diameter and mounted sanding accessories not exceeding 80 mm in diameter such as, threaded cones or plugs that are threaded on a mandrel with an unrelieved shoulder flange, mandrel mounted wheels and rotary files with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity. IEC 60745 2-23 compliance testing does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory.

Keystone Compliance assists manufacturers with IEC 60745-2-23 and EN 60745-2-23 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 60745-2-23 test lab needs.

Related Standards:

IEC 60745-1 Hand-held motor-operated electric tools – Safety

IEC 60745-2-1 Drills and impact drills

IEC 60745-2-2 Screwdrivers and impact wrenches

IEC 60745-2-3 Grinders, polishers and disk-type sanders

IEC 60745-2-4 Sanders and polishers other than disk type

IEC 60745-2-5 Circular saws

IEC 60745-2-6 Hammers

IEC 60745-2-7 Spray guns for non-flammable liquids

IEC 60745-2-8 Shears and nibblers

IEC 60745-2-9 Tappers

IEC 60745-2-11 Reciprocating saws (jig and sabre saws)

IEC 60745-2-12 Concrete vibrators

IEC 60745-2-13 Chain saws

IEC 60745-2-14 Planers

IEC 60745-2-15 Hedge trimmers

IEC 60745-2-16 Tackers

IEC 60745-2-17 Routers and trimmers

IEC 60745-2-18 Strapping tools

IEC 60745-2-19 Jointers

IEC 60745-2-20 Band saws

IEC 60745-2-21 Drain cleaners

IEC 60745-2-22 Cut-off machines