Select Page

IEC 60745-2-22 Testing

Hand-held motor-operated electric tools – Safety – Part 2-22: cut-off machines

IEC 60745-2-22 Abstract:

IEC 60745 2 22 and EN 60745 2 22 testing applies to cut-off machines fitted with one bonded reinforced wheel of Type 41 or Type 42, orone or more diamond cut-off wheels with the peripheral gaps, if any, not exceeding 10 mm and with a rated speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity and a rated wheel capacity range of 55 mm to 410 mm.

These machines are intended to cut materials such as metals, concrete, masonry, glass and tile. IEC 60745-2-22 compliance testing does not apply to grinders, sanders, or polishers, even if they can be converted to a cut-off machine, which are covered by IEC 60745-2-3, circular saws which are covered by IEC 60745-2-5.

Keystone Compliance assists manufacturers with IEC 60745-2-22 and EN 60745-2-22 test compliance. Please contact us for more information on how Keystone Compliance can assist you with identifying and fulfilling your IEC 60745-2-22 test lab needs.

Related Standards:

IEC 60745-1 Hand-held motor-operated electric tools – Safety

IEC 60745-2-1 Drills and impact drills

IEC 60745-2-2 Screwdrivers and impact wrenches

IEC 60745-2-3 Grinders, polishers and disk-type sanders

IEC 60745-2-4 Sanders and polishers other than disk type

IEC 60745-2-5 Circular saws

IEC 60745-2-6 Hammers

IEC 60745-2-7 Spray guns for non-flammable liquids

IEC 60745-2-8 Shears and nibblers

IEC 60745-2-9 Tappers

IEC 60745-2-11 Reciprocating saws (jig and sabre saws)

IEC 60745-2-12 Concrete vibrators

IEC 60745-2-13 Chain saws

IEC 60745-2-14 Planers

IEC 60745-2-15 Hedge trimmers

IEC 60745-2-16 Tackers

IEC 60745-2-17 Routers and trimmers

IEC 60745-2-18 Strapping tools

IEC 60745-2-19 Jointers

IEC 60745-2-20 Band saws

IEC 60745-2-21 Drain cleaners

IEC 60745-2-23 Die grinders and small rotary tools